With this page we will show you how to successfully reset the Binatone WR1500N2 router back to factory defaults. This is different than a router reboot. Rebooting a router is cycling the power to the device by unplugging the power, wait about 30 seconds, then plugging the power back in. A router reset on the other hand takes all the settings and reverts them all back to factory defaults.
Tip: Resetting a router is a serious step. We recommend making a list of the settings that you know will be changed. We have started the list for you:
- The router's main username and password.
- The Internet ID and password.
- If you use DSL you need to re-enter the ISP username and password. This information can be obtained by calling your Internet Service Provider.
- Have you made any other changes to the router's interface? Have you forwarded any ports? Have you changed your DNS settings or router's IP address?
Other Binatone WR1500N2 Guides
This is the reset router guide for the Binatone WR1500N2.We also have the following guides for the same router:
- Binatone WR1500N2 - How to change the IP Address on a Binatone WR1500N2 router
- Binatone WR1500N2 - Binatone WR1500N2 Login Instructions
- Binatone WR1500N2 - Binatone WR1500N2 User Manual
- Binatone WR1500N2 - Setup WiFi on the Binatone WR1500N2
- Binatone WR1500N2 - Binatone WR1500N2 Screenshots
- Binatone WR1500N2 - Information About the Binatone WR1500N2 Router
Reset the Binatone WR1500N2
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
First, where is the reset button on your router? Almost all routers have a "hard reset" button in order to revert all settings back to factory in the event that you forget your IP address, username, or password in order to enter the router's graphical interface. For the Binatone WR1500N2 router the reset button is located on the front panel. See the image below.
To reset the Binatone WR1500N2 router you need to hold this button down for at least 5 seconds. Less than that and all you have done is turned on the WPS function of your router. Make sure to hold down this reset button for a minimum of 5 seconds.
Remember that this reset erases every setting you have ever changed on the Binatone WR1500N2 router. It reverts every setting back to factory defaults. Other options of troubleshooting should be used before you decide to reset this router.
Login to the Binatone WR1500N2
Now that you have finished resetting the Binatone WR1500N2 router you need to login to it. In order to do this you need to know what the factory default IP address, username, and password are. We have already found this information for you. It is included in our Binatone WR1500N2 Login Guide.
Change Your Password
Once you have successfully logged into the Binatone WR1500N2 router you should immediately change your router's default password. Default passwords are not to be left alone as they are usually very easy to guess. Using our Choosing a Strong Password guide will help you create a strong and memorable password for your router.
Tip: If this router is located in your home go ahead and write the new password down on a sticky note and attach it to the bottom of the router for future reference.
Setup WiFi on the Binatone WR1500N2
Finally, you need to take a look at the WiFi section of your Binatone WR1500N2 router. The SSID/network name, password, and security method are all reverted to factory defaults. To ensure a secure home network you need to use WPA2 with a strong password. We have a guide with step-by-step instructions for you if you need it. It is titled How to Setup WiFi on the Binatone WR1500N2.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Binatone WR1500N2 Help
Be sure to check out our other Binatone WR1500N2 info that you might be interested in.
This is the reset router guide for the Binatone WR1500N2.We also have the following guides for the same router:
- Binatone WR1500N2 - How to change the IP Address on a Binatone WR1500N2 router
- Binatone WR1500N2 - Binatone WR1500N2 Login Instructions
- Binatone WR1500N2 - Binatone WR1500N2 User Manual
- Binatone WR1500N2 - Setup WiFi on the Binatone WR1500N2
- Binatone WR1500N2 - Binatone WR1500N2 Screenshots
- Binatone WR1500N2 - Information About the Binatone WR1500N2 Router