Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Cabac LWADSLR4P router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Cabac LWADSLR4P router.

Other Cabac LWADSLR4P Guides

This is the ip address guide for the Cabac LWADSLR4P. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Cabac LWADSLR4P

To get started configuring the Cabac LWADSLR4P LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Cabac LWADSLR4P, follow our Cabac LWADSLR4P Login Guide.

Change the LAN IP Address on a Cabac LWADSLR4P

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Cabac LWADSLR4P router.

Once you have logged into the Cabac LWADSLR4P you will start on the Status page. From here, click the Interface Setup tab at the top of the page. Three choices will appear under this, choose the one that says LAN.

Configure the LAN section of your Cabac LWADSLR4P

router setup
This is the setup page from your Cabac LWADSLR4P router.

Next, find the box labeled IP Address and enter the new address you have chosen for your Cabac Router. In this screenshot, someone has used the address of 192.168.1.1, we would highly recommend using this.

Do not change the IP Subnet Mask, it needs to stay at 255.255.255.0

You will also want to leave the DHCP Server enabled.

For any of these changes to take effect, click the button on the bottom labeled Save.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Cabac LWADSLR4P Info

Don't forget about our other Cabac LWADSLR4P info that you might be interested in.

This is the ip address guide for the Cabac LWADSLR4P. We also have the following guides for the same router: