When you reset a router you are taking all the settings and returning them to factory defaults. When you reboot a router you cycle the power to the device. This page goes over how to reset the Cisco Linksys-E4200 router.
Warning: Resetting this router can cause additional problems for you if you don't understand what settings have been changed. We recommend that you consider the following:
- The Internet name and password are reverted back to factory settings.
- The router's main username and password are returned to factory settings as well.
- If you use a DSL router you need to re-enter the ISP username and password. These can be gathered from your local Internet Service Provider.
- Now make a list of any other settings you may have changed in the past. This may include port forwards or maybe IP address changes.
Other Cisco Linksys E4200 Guides
This is the reset router guide for the Cisco Linksys E4200 1.0.00. We also have the following guides for the same router:
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 Login Instructions
- Cisco Linksys E4200 1.0.00 - How to change the IP Address on a Cisco Linksys E4200 router
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 User Manual
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 Port Forwarding Instructions
- Cisco Linksys E4200 1.0.00 - How to change the DNS settings on a Cisco Linksys E4200 router
- Cisco Linksys E4200 1.0.00 - Setup WiFi on the Cisco Linksys E4200
- Cisco Linksys E4200 1.0.00 - Information About the Cisco Linksys E4200 Router
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 Screenshots
Reset the Cisco Linksys E4200
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Once you have decided you want to reset the Cisco Linksys-E4200 router you need to know where the reset button is located. On this particular router it is located on the back side of the router. See the image below for reference.
Using an unfolded paperclip or pin press and hold the reset button for about 10 seconds. Less than that and you may only reboot the router instead of resetting it.
Remember this will erase every setting you have ever changed on your device. If you want to try and avoid re-configuring the router you need to try other troubleshooting methods first.
Login to the Cisco Linksys E4200
After you have reset the Cisco Linksys-E4200 router you need to login to the device using the proper default username and password. We have found these for you and included them in our Login Guide for the Cisco Linksys-E4200 router.
Change Your Password
It's always a good idea to change default values. We strongly recommend changing the default password you just used to access the router setup. If you need help coming up with a good password check out our guide titled Choosing a Strong Password.
Tip: Don't lose this password. If you keep this router in a secure place such as your home it's okay to write this new password down on a slip of paper and attach it to the bottom of the router for next time.
Setup WiFi on the Cisco Linksys-E4200
The wireless settings should be checked next. We suggest using the option of WPA2 along with a strong password. If you need help with this step we have a guide titled How to Setup WiFi on the Cisco Linksys-E4200.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Cisco Linksys E4200 Help
Be sure to check out our other Cisco Linksys E4200 info that you might be interested in.
This is the reset router guide for the Cisco Linksys E4200 1.0.00. We also have the following guides for the same router:
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 Login Instructions
- Cisco Linksys E4200 1.0.00 - How to change the IP Address on a Cisco Linksys E4200 router
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 User Manual
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 Port Forwarding Instructions
- Cisco Linksys E4200 1.0.00 - How to change the DNS settings on a Cisco Linksys E4200 router
- Cisco Linksys E4200 1.0.00 - Setup WiFi on the Cisco Linksys E4200
- Cisco Linksys E4200 1.0.00 - Information About the Cisco Linksys E4200 Router
- Cisco Linksys E4200 1.0.00 - Cisco Linksys E4200 Screenshots