How to change the IP Address on a Cisco EPC3928AD router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Cisco EPC3928AD router.

Other Cisco EPC3928AD Guides

This is the ip address guide for the Cisco EPC3928AD.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Cisco EPC3928AD

To get started configuring the Cisco EPC3928AD LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Cisco EPC3928AD, follow our Cisco EPC3928AD Login Guide.

Change the LAN IP Address on a Cisco EPC3928AD

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Cisco router.

After logging into the Cisco EPC3928AD router you'll be taken to the Quick Setup page. To change your router's IP Address click the Lan Setup tab near the top of the page.

Configure the LAN section of your Cisco EPC3928AD

router IP address lan home network
This is the lan page from your Cisco router.

You should be taken to the page you see above.

You can now change your Local IP Address. However, in this router you can only change the last two numbers.

Make sure not to change the Subnet Mask. This needs to stay at 255.255.255.0

When you are finished click the Save Settings button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Cisco EPC3928AD Info

Don't forget about our other Cisco EPC3928AD info that you might be interested in.

This is the ip address guide for the Cisco EPC3928AD.We also have the following guides for the same router: