Corega CG-WLBARGO Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Corega CG-WLBARGO router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Corega CG-WLBARGO Guides

This is the port forwarding guide for the Corega CG-WLBARGO.We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Corega CG-WLBARGO to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Corega CG-WLBARGO

To get started forwarding a port you need to login to your Corega CG-WLBARGO router. If you are already logged in you can skip this step.

To login to the Corega CG-WLBARGO, follow our Corega CG-WLBARGO Login Guide.

Forward a Port on the Corega CG-WLBARGO router

Find The Port Forwarding Section of the Corega CG-WLBARGO

router status mac address internet IP
This is the status page from your Corega router.

Starting on the Status page of the Corega CG-WLBARGO router, click the choice on the left side of the page labeled Advanced Settings. Then below that, pick Virtual Servers.

Configure the Port Forwarding section of your Corega CG-WLBARGO

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Corega router.

On this new page, use the drop down menu of Connecting with a PC to choose the computer you are forwarding these ports to. This drop down box should contain a list of all the computers visible on your network.

Next, select User Definition from the Service drop down box.

If you are forwarding a single port, enter that number in the left and the right Port Range boxes. If you are forwarding a range of ports, enter the lowest number of the range in the left Port Range box, and the highest number of the range in the right Port Range.

Use the Protocol drop down menu to select the type of protocol you need to use to forward these ports.

In the Remark box, enter the name of the program you are forwarding these ports for.

Click the Submit button when you are done.

That's it, congratulations!

Test if Your Ports are Open

Now that you have forwarded ports on the Corega CG-WLBARGO you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Corega CG-WLBARGO Info

Don't forget about our other Corega CG-WLBARGO info that you might be interested in.

This is the port forwarding guide for the Corega CG-WLBARGO.We also have the following guides for the same router: