If you've reached this page it's likely you are considering a reset to solve a problem you are having with your Cradlepoint MBR95 router. This guide will show you how to reset the Cradlepoint MBR95 router back it's original factory defaults. This is not the same thing as a reboot. A reboot is a way of cycling the power to the router. This solves some minor behavioral problems you may be experiencing with your device. A reset is done if you have forgotten your password or something similar. A reset takes all the settings and returns every one of them back to factory defaults.
Warning: A factory reset is a big step and shouldn't be taken lightly. Make sure you fully understand that all settings you have changed in the past will be "forgotten". Please consider the following before you continue:
- The router's main username and password are erased and returned to original factory settings.
- The Internet settings such as the SSID and password are also placed back to original defaults.
- If this is a DSL router you need to re-enter the ISP username and password. This information can be found by calling your local Internet Service Provider.
- If you have made any other changes like DNS or port forwards these are erased. Make note of any settings you will need to re-enter after the reset is complete.
Other Cradlepoint MBR95 Guides
This is the reset router guide for the Cradlepoint MBR95. We also have the following guides for the same router:
Reset the Cradlepoint MBR95
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Begin by locating the tiny recessed reset button on the outside of the device. In this case it is found on the back panel of the device. We have circled it's location for you in the image below.
Take something small like the end of an unfolded paperclip to press and hold this reset button down for a full 10 seconds. This initiates the reset process. If you don't hold the button down for long enough you end up simply rebooting the router instead of resetting it. This can cause a lot of confusion because then the default values don't work.
Remember resetting the Cradlepoint MBR95 router erases every setting you have ever changed. If you want to try and avoid a re-configuration you need to exhaust all other troubleshooting methods first.
Login to the Cradlepoint MBR95
Now that you've reset your Cradlepoint MBR95 router you'll need to use the default username and password to login. We have these for you in our Login Guide.
Tip: If the defaults aren't working for you, don't panic. It may be because the reset button wasn't held down for long enough.
Change Your Password
After logging in it's a good idea to change your router's default password. For help in making a strong password take a look through our Choosing a Strong Password Guide.
Tip: To keep from losing your new password try writing it on a sticky note and putting it on the bottom of your router.
Setup WiFi on the Cradlepoint MBR95
It's now time to check on the wireless settings. It can be easy to forget this. Change the SSID and password along with the security method. We recommend using WPA2-PSK or Personal as your security method. For more details check out our guide titled How to Setup WiFi on the Cradlepoint MBR95.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Cradlepoint MBR95 Help
Be sure to check out our other Cradlepoint MBR95 info that you might be interested in.
This is the reset router guide for the Cradlepoint MBR95. We also have the following guides for the same router: