Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Digisol DG-BG4100NU router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Digisol DG-BG4100NU router.

Other Digisol DG-BG4100NU Guides

This is the ip address guide for the Digisol DG-BG4100NU. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Digisol DG-BG4100NU

To get started configuring the Digisol DG-BG4100NU LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Digisol DG-BG4100NU, follow our Digisol DG-BG4100NU Login Guide.

Change the LAN IP Address on a Digisol DG-BG4100NU

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Digisol DG-BG4100NU router.

We begin this LAN IP Address guide on the System Status page of the Digisol DG-BG4100NU router. To change your router's IP address go ahead and click the link at the top of the page labeled Network.

Under that, choose LAN. Then on the left side of the page click the option of LAN IP if you are not on the LAN Interface Setup.

Configure the LAN section of your Digisol DG-BG4100NU

router IP address lan home network
This is the lan page from your Digisol DG-BG4100NU router.

Once on this new page, enter the new router IP address in the box labeled IP Address. It is at the top of the page. Ending this address in a one can make it easier to remember. Some good addresses are 10.0.0.1 or 192.168.0.1

That's it, don't make any other changes. Simply click the button titled Apply Changes before you continue.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Digisol DG-BG4100NU Info

Don't forget about our other Digisol DG-BG4100NU info that you might be interested in.

This is the ip address guide for the Digisol DG-BG4100NU. We also have the following guides for the same router: