How to change the IP Address on a Digisol DG-BR4015N router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Digisol DG-BR4015N router.

Other Digisol DG-BR4015N Guides

This is the ip address guide for the Digisol DG-BR4015N. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Digisol DG-BR4015N

To get started configuring the Digisol DG-BR4015N LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Digisol DG-BR4015N, follow our Digisol DG-BR4015N Login Guide.

Change the LAN IP Address on a Digisol DG-BR4015N

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Digisol DG-BR4015N router.

We begin this guide on the Router Status page of the Digisol DG-BR4015N router. To change your router's IP Address go to Network on the left hand side of the page. From here go to IP Address(Upnp).

Configure the LAN section of your Digisol DG-BR4015N

router IP address lan home network
This is the lan page from your Digisol DG-BR4015N router.

This takes you to the page you see above.

On this page you can change your IP Address. Enter your new IP Address into the given box. Can't think of any good ones? A good option is 10.0.0.1

Be sure not to change the Subnet Mask. This needs to stay at 255.255.255.0

That's it! You're finished. Just be sure to save your changes before leaving.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Digisol DG-BR4015N Info

Don't forget about our other Digisol DG-BR4015N info that you might be interested in.

This is the ip address guide for the Digisol DG-BR4015N. We also have the following guides for the same router: