Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Digisol DG-BR4015N

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will be explaining how to reset the Digisol DG-BR4015N router back to it's original factory defaults. This is not the same thing as a reboot. When you want to reboot a router you are wanting to cycle the power to the device. This will solve most minor behavioral problems your router may be experiencing. If you want to reset your router you want to take all the settings and return every one of them back to factory defaults.

Warning: This reset is a serious step. Make sure you have considered the ramifications of this. Consider the following before continuing:

  • If this is a DSL router you will need to re-enter the ISP or Internet Service Provider's information such as username and password. Call your ISP for more details on this.
  • The router's main setup username and password are reverted to factory settings.
  • The Internet information such as name/SSID and password are reverted to factory default values.
  • Have you ever made any other changes to your router? These are reverted as well and need your attention after the reset is complete.

Other Digisol DG-BR4015N Guides

This is the reset router guide for the Digisol DG-BR4015N. We also have the following guides for the same router:

Reset the Digisol DG-BR4015N

The first step in a reset is to locate the physical reset button. Normally this button will be tiny and recessed in order to avoid accidentally resetting your router. We have circled the location of the Digisol DG-BR4015N reset button in the image below:

router reset factory settings
This is the reset page from your Digisol DG-BR4015N router.

As you can see this reset button also acts as the WPS button. Learn more about WPS on this What is WPS page.

Take the tip of a sharp pencil and press down on the reset button for about 10 seconds to start the reset. If you press this button for less than 5 seconds you start the WPS.

Remember resetting the Digisol DG-BR4015N router requires a reconfiguration afterwards. To avoid that you should try other troubleshooting methods first.

Login to the Digisol DG-BR4015N

Now that you've reset the Digisol DG-BR4015N router you'll need to log into it. Do this using the default username and password. Don't know what these are? We have them listed for you in our Login Guide.

Tip: If the defaults don't seem to be logging you in it could be because you didn't hold the reset button down for long enough.

Change Your Password

After logging in we recommend changing your password. A strong password contains no personal information and is 14-20 characters in length. For more help be sure to take a look through our Choosing a Strong Password Guide.

Tip: Keep from losing your new password by writing it on a sticky ntoe and attaching it to the underside of your router.

Setup WiFi on the Digisol DG-BR4015N

Now it's time to check the wireless settings. This includes the SSID or network name, the Internet password, and the authentication type. We recommend using WPA2 with a nice strong password to protect your network. For more information you should read our How to Setup WiFi on the Digisol DG-BR4015N guide.

Digisol DG-BR4015N Help

Be sure to check out our other Digisol DG-BR4015N info that you might be interested in.

This is the reset router guide for the Digisol DG-BR4015N. We also have the following guides for the same router: