Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Dlink Airspot DSA-3100 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Dlink Airspot DSA-3100 router.

Other Dlink Airspot DSA-3100 Guides

This is the ip address guide for the Dlink Airspot DSA-3100. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink Airspot DSA-3100

To get started configuring the Dlink Airspot DSA-3100 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink Airspot DSA-3100, follow our Dlink Airspot DSA-3100 Login Guide.

Change the LAN IP Address on a Dlink Airspot DSA-3100

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Dlink Airspot DSA-3100 router.

After logging into the Dlink DSA-3100 you begin on the System Status page. When you have to change your IP Address, the address you are looking at while inside your network, click the blue box, on the top, labeled Home, then on the left, Private Network.

Configure the LAN section of your Dlink Airspot DSA-3100

router setup
This is the setup page from your Dlink Airspot DSA-3100 router.

This opens up the Interface Configuration page. Find the box labeled IP Address and enter the new address you have chosen for your Router. We would like to recommend using 192.168.0.1 as your IP Address.

Make sure to not change your Subnet Mask. It should remain at 255.255.255.0

You will most likely want to leave the bullet labeled Enable DHCP Server marked.

When you are done, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink Airspot DSA-3100 Info

Don't forget about our other Dlink Airspot DSA-3100 info that you might be interested in.

This is the ip address guide for the Dlink Airspot DSA-3100. We also have the following guides for the same router: