Dlink DAP-1555-Bridge-Mode Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This guide shows you exactly how to login to the Dlink DAP-1555-Bridge-Mode router.

Other Dlink DAP-1555-Bridge-Mode Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Dlink DAP-1555-Bridge-Mode. We also have the following guides for the same router:

Find Your Dlink DAP-1555-Bridge-Mode Router IP Address

Before you can log in to your Dlink DAP-1555-Bridge-Mode router, you need to figure out it's internal IP address.

Known DAP-1555-Bridge-Mode IP Addresses
192.168.0.50

Pick one of these IP addresses and then follow the rest of this guide.

If later on in this guide you do not find your router using the IP address that you pick, then you can try different IP addresses until you get logged in. It is harmless to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you can try one of the following steps:

Now that you have your router's internal IP Address, we are ready to login to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN faster than ever deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Dlink DAP-1555-Bridge-Mode Router

The Dlink DAP-1555-Bridge-Mode router has a web-based interface. You need to use a web browser to manage it, such as Chrome, Edge, or Firefox.

Enter Dlink DAP-1555-Bridge-Mode Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your Dlink DAP-1555-Bridge-Mode router. The address bar will look like this:

Press the Enter key on your keyboard. You should see a window asking for your Dlink DAP-1555-Bridge-Mode password.

Dlink DAP-1555-Bridge-Mode Default Username and Password

You must know your Dlink DAP-1555-Bridge-Mode username and password in order to log in. It's possible that the router's password is still set to the factory default. Try all of the Dlink DAP-1555-Bridge-Mode factory default usernames and passwords below.

Dlink DAP-1555-Bridge-Mode Default Usernames and Passwords
UsernamePassword
adminblank

Enter your username and password in the dialog box that pops up. You can try them all.

router login screen
This is the login page from your Dlink DAP-1555-Bridge-Mode router.

Dlink DAP-1555-Bridge-Mode Home Screen

After you get logged in you should see the Dlink DAP-1555-Bridge-Mode home screen, which looks like this:

router status mac address internet IP
This is the status page from your Dlink DAP-1555-Bridge-Mode router.

If you see this screen, then good job, you are now logged in to your Dlink DAP-1555-Bridge-Mode router. You are now ready to follow one of our other guides.

Solutions To Dlink DAP-1555-Bridge-Mode Login Problems

If things are not going right and you are unable to login to your router, then here are some other things that you can try.

Dlink DAP-1555-Bridge-Mode Password Doesn't Work

It's possible that your router's factory default password is different than what we have listed. Be sure to try other Dlink passwords. Here is our list of all Dlink Passwords.

Forgot Password to Dlink DAP-1555-Bridge-Mode Router

If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.

How to Reset the Dlink DAP-1555-Bridge-Mode Router To Default Settings

As a last resort, you can reset your router to factory defaults. If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings.

Other Dlink DAP-1555-Bridge-Mode Guides

Here are some of our other Dlink DAP-1555-Bridge-Mode info that you might be interested in.

This is the login guide for the Dlink DAP-1555-Bridge-Mode. We also have the following guides for the same router: