This page shows how to change the LAN IP Address on the Dlink DFL-1100 Firewall router.
Other Dlink DFL-1100 Firewall Guides
This is the ip address guide for the Dlink DFL-1100 Firewall. We also have the following guides for the same router:
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall Login Instructions
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall User Manual
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall Port Forwarding Instructions
- Dlink DFL-1100 Firewall - How to Reset the Dlink DFL-1100 Firewall
- Dlink DFL-1100 Firewall - Information About the Dlink DFL-1100 Firewall Router
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Dlink DFL-1100 Firewall
To get started configuring the Dlink DFL-1100 Firewall LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Dlink DFL-1100 Firewall, follow our Dlink DFL-1100 Firewall Login Guide.
Change the LAN IP Address on a Dlink DFL-1100 Firewall
If you followed our login guide above then you should see this screen.
After you have logged into the Dlink DFL-1100 you see the Administration Settings page for your Router. To change your IP Address, the address you can see while inside your network, click the Interfaces button on the left side of the page. This opens a new page called Interfaces Settings, with several choices down below. Click the edit button for one labeled LAN.
Configure the LAN section of your Dlink DFL-1100 Firewall
On this new page, enter your new IP Address in the box labeled IP Address, one option for an address is 192.168.1.1
We highly recommend that you leave the Subnet Mask at 255.255.255.0
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Dlink DFL-1100 Firewall Info
Don't forget about our other Dlink DFL-1100 Firewall info that you might be interested in.
This is the ip address guide for the Dlink DFL-1100 Firewall. We also have the following guides for the same router:
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall Login Instructions
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall User Manual
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall Port Forwarding Instructions
- Dlink DFL-1100 Firewall - How to Reset the Dlink DFL-1100 Firewall
- Dlink DFL-1100 Firewall - Information About the Dlink DFL-1100 Firewall Router
- Dlink DFL-1100 Firewall - Dlink DFL-1100 Firewall Screenshots