Dlink DIR-320 Port Forwarding Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page will show you how to setup a port forward on the Dlink DIR-320 router.

If you are not sure what port forwarding is you can read our What is Port Forwarding guide to help get started.

Other Dlink DIR-320 Guides

This is the port forwarding guide for the Dlink DIR-320. We also have the following guides for the same router:

Configure your Computer to Have a Static IP Address

Port forwarding the Dlink DIR-320 to your computer can be more reliable if you first configure a static IP address on your computer. We have instructions to setup a static IP address for Windows 7, Windows 8, and a variety of other devices on our Static IP Address Settings page.

Please note that while setting up a static IP address on your computer is optional, it is still a very good idea to go ahead and do it. In the long run it will make your port forward much more reliable.

Login To The Dlink DIR-320

To get started forwarding a port you need to login to your Dlink DIR-320 router. If you are already logged in you can skip this step.

To login to the Dlink DIR-320, follow our Dlink DIR-320 Login Guide.

Forward a Port on the Dlink DIR-320 router

Find The Port Forwarding Section of the Dlink DIR-320

router setup
This is the setup page from your Dlink DIR-320 router.

You begin on the INTERNET CONNECTION page of the Dlink DIR-320 router. To create a forwarded port, click the link at the top of the page labeled ADVANCED. Then, in the left sidebar, click Port Forwarding.

Configure the Port Forwarding section of your Dlink DIR-320

Now to forward a port, make the following changes:

port forwarding nat screenshot
This is the port forwarding page from your Dlink DIR-320 router.

On this new page, find an empty row of boxes and place a checkmark in the small box on the left side of the page. This is enabling the rule you are about to create.

Next is the Name box. Although it isn't really important what you enter here, we suggest entering the name of the program you are forwarding these ports for.

Below that is the IP Address. You need to enter the local IP address of the computer you are forwarding these ports to. What is my IP Address is a great guide on how to find your computer's internal IP address if you are unsure.

To Forward a Single Port

Enter the port number in the left and right boxes of both the Public Port, and the Private Port.

To Forward a Range of Ports

Enter the lowest number of the range in the left boxes of both the Public Port, and Private Port. Enter the highest number of the range in the right boxes of both the Public Port, and the Private Port.

In the Traffic Type drop down menu, choose the type of transport or protocol you want to use to forward these ports.

Click the Save Settings button at the top of the page.

Congratulations, you did it!

Test if Your Ports are Open

Now that you have forwarded ports on the Dlink DIR-320 you should test to see if your ports are forwarded correctly.

To test if your ports are forwarded you should use our Open Port Check tool.

Other Dlink DIR-320 Info

Don't forget about our other Dlink DIR-320 info that you might be interested in.

This is the port forwarding guide for the Dlink DIR-320. We also have the following guides for the same router: