How to change the IP Address on a Dlink EBR-2310v2 router

This page shows how to change the LAN IP Address on the Dlink EBR-2310v2 router.

Other Dlink EBR-2310v2 Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Dlink EBR-2310v2

To get started configuring the Dlink EBR-2310v2 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink EBR-2310v2, follow our Dlink EBR-2310v2 Login Guide.

Change the LAN IP Address on a Dlink EBR-2310v2

If you followed our login guide above then you should see this screen.

After logging into the Dlink EBR-2310v2 you see the Device Info page. The first thing to do when changing your IP Address is to click the choice on the top labeled Setup. Then on the left, Network Settings.

Configure the LAN section of your Dlink EBR-2310v2

Once this new page comes up, click the box marked Router IP Address and enter the new one you have picked out for your Router. In this screenshot, someone has used the address of 192.168.0.1, we highly recommend using this also.

Please don't change the Subnet Mask. It should always stay at 255.255.255.0

Click Save Settings, located at the top of the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Dlink EBR-2310v2 Info

Don't forget about our other Dlink EBR-2310v2 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.