Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Draytek Vigor-2820n

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will show you how to reset the DrayTek Vigor-2820n router back to the original factory defaults. This is not the same thing as a reboot. When I use the word reboot I am referring to a cycle in the power to the unit. When I use the word reset I am referring to a complete factory reset of all settings back to the original factory defaults.

Warning: Resetting a router like this one is a big step and should not be taken lightly. We strongly recommend making a list of all the settings you may of changed in the past. Things you need to consider are:

  • The router's main username and password are erased and reverted back to factory defaults.
  • The Internet name and password are also erased and returned to factory defaults.
  • If you have a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Find out more by calling your local ISP.
  • If you have ever forwarded a port or changed any settings such as IP addresses make sure to write these down in your list.

Other Draytek Vigor-2820n Guides

This is the reset router guide for the Draytek Vigor-2820n. We also have the following guides for the same router:

Reset the Draytek Vigor-2820n

Do you know where the reset button is located on the DrayTek Vigor-2820n? It should be located on the front panel in the lower left corner.

router reset factory settings
This is the reset page from your Draytek Vigor-2820n router.

With the router powered on, take a straightened paperclip and press down on the reset button for about 5 seconds until the ACT light begins to flash faster than it was before. If you don't hold this button down for long enough you might end up only rebooting the router instead of resetting it like you wanted.

Please don't forget that this reset is going to erase every single setting you have ever changed on your device. We recommend trying other methods of troubleshooting before you continue.

Login to the Draytek Vigor-2820n

After you've reset the DrayTek Vigor-2820n router you'll need to log into it. This is done by using the factory default username and password provided for your use in our Login Guide.

Tip: Defaults not logging you in? It could be because the reset button wasn't held down for long enough.

Change Your Password

Now that you've reset and logged into your router we recommend setting a new password for it. This can be anything you want, however bear in mind that a strong password includes no personal information and is 14-20 characters in length. For more help check out our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on a sticky note and attaching it to the bottom of your router.

Setup WiFi on the DrayTek Vigor-2820n

Finally it's time to start the reconfiguration process. That list you made earlier should be used to remember what settings you need to change. One setting that you may forget is the WiFi settings. For a great guide on that topic check out our How to Setup WiFi on the DrayTek Vigor-2820n page.

Draytek Vigor-2820n Help

Be sure to check out our other Draytek Vigor-2820n info that you might be interested in.

This is the reset router guide for the Draytek Vigor-2820n. We also have the following guides for the same router: