Setup Router logo in white Setup router name logo in white
Get Software

Dynamode BR6004W-G2M Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

If you need to login to the Dynamode BR6004W-G2M router, then this guide shows you how.

Other Dynamode BR6004W-G2M Guides

This is the login guide for the Dynamode BR6004W-G2M. We also have the following guides for the same router:

Find Your Dynamode BR6004W-G2M Router IP Address

We need to find your Dynamode BR6004W-G2M router's internal IP address before we can log in to it.

Known BR6004W-G2M IP Addresses
192.168.1.1

You may have to try using a few different IP addresses from the list above. Just pick one and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. I will not hurt anything to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you have the following options:

Choose an internal IP Address using one of the above methods and then try to login to your router.

Login to the Dynamode BR6004W-G2M Router

The Dynamode BR6004W-G2M is managed through a web-based interface. In order to log in to it, you need to use a web browser, such as Chrome, Firefox, or Edge.

Enter Dynamode BR6004W-G2M Internal IP Address

Either copy/paste or type the internal IP address of your Dynamode BR6004W-G2M router into the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. You should see a window asking for your Dynamode BR6004W-G2M password.

Dynamode BR6004W-G2M Default Username and Password

You must know your Dynamode BR6004W-G2M username and password in order to log in. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. Try all of the Dynamode BR6004W-G2M factory default usernames and passwords below.

Dynamode BR6004W-G2M Default Usernames and Passwords
UsernamePassword
adminadmin

In the window that pops up, enter your username and password. Keep trying them all until you get logged in.

Dynamode BR6004W-G2M login screen

Dynamode BR6004W-G2M Home Screen

Once you are logged in you will see the Dynamode BR6004W-G2M home screen, like this:

router status mac address internet IP
This is the status page from your Dynamode BR6004W-G2M router.

If you see this screen, then you know that you are logged in to your Dynamode BR6004W-G2M router. Now you can follow any of our other guides for this router.

Solutions To Dynamode BR6004W-G2M Login Problems

If things are not going right and you are unable to login to your router, then here are some other things that you can try.

Dynamode BR6004W-G2M Password Doesn't Work

Your router's factory default password might be different than what we have listed here. You can try other Dynamode passwords. Here is our list of all Dynamode Passwords.

Forgot Password to Dynamode BR6004W-G2M Router

If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.

How to Reset the Dynamode BR6004W-G2M Router To Default Settings

If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. You can follow our How To Reset your Router guide for help.

Other Dynamode BR6004W-G2M Guides

Here are some of our other Dynamode BR6004W-G2M info that you might be interested in.

This is the login guide for the Dynamode BR6004W-G2M. We also have the following guides for the same router: