This page shows how to change the LAN IP Address on the Dynex DX-E402 router.
Other Dynex DX-E402 Guides
This is the ip address guide for the Dynex DX-E402. We also have the following guides for the same router:
- Dynex DX-E402 - Dynex DX-E402 User Manual
- Dynex DX-E402 - Dynex DX-E402 Login Instructions
- Dynex DX-E402 - How to change the DNS settings on a Dynex DX-E402 router
- Dynex DX-E402 - How to Reset the Dynex DX-E402
- Dynex DX-E402 - Information About the Dynex DX-E402 Router
- Dynex DX-E402 - Dynex DX-E402 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Dynex DX-E402
To get started configuring the Dynex DX-E402 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Dynex DX-E402, follow our Dynex DX-E402 Login Guide.
Change the LAN IP Address on a Dynex DX-E402
If you followed our login guide above then you should see this screen.
To change the IP Address, the address you are looking at while inside the network, first log into the Dynex DX-E402. This places you on the Router Status page. Then, click Network on the left of the screen, in blue. This opens three new choices, click the one labeled LAN.
Configure the LAN section of your Dynex DX-E402
Place your cursor in the box marked IP Address and enter the new address you have picked out for your Router. In this particular screenshot, someone has used 192.168.1.1, this is a great choice, we recommend that you use it also.
Make sure to leave the Subnet Mask at 255.255.255.0
Don't forget to Save before exiting.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Dynex DX-E402 Info
Don't forget about our other Dynex DX-E402 info that you might be interested in.
This is the ip address guide for the Dynex DX-E402. We also have the following guides for the same router:
- Dynex DX-E402 - Dynex DX-E402 User Manual
- Dynex DX-E402 - Dynex DX-E402 Login Instructions
- Dynex DX-E402 - How to change the DNS settings on a Dynex DX-E402 router
- Dynex DX-E402 - How to Reset the Dynex DX-E402
- Dynex DX-E402 - Information About the Dynex DX-E402 Router
- Dynex DX-E402 - Dynex DX-E402 Screenshots