Thank you to the users of this site who have submitted the screenshots below.
If you would like to upload screenshots for us to use, please use our Router Screenshot Grabber, which is a free tool in Network Utilities. It makes the capture process easy and sends the screenshots to us automatically.
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
![NordVPN is the fastest VPN!](/build/images/partner/nordvpn/in-article-large/affiliate-fast-vpn-1500x300.png)
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the screenshots guide for the Dynex DX-E402. We also have the following guides for the same router:
- Dynex DX-E402 - How to change the IP Address on a Dynex DX-E402 router
- Dynex DX-E402 - Dynex DX-E402 User Manual
- Dynex DX-E402 - Dynex DX-E402 Login Instructions
- Dynex DX-E402 - How to change the DNS settings on a Dynex DX-E402 router
- Dynex DX-E402 - How to Reset the Dynex DX-E402
- Dynex DX-E402 - Information About the Dynex DX-E402 Router
All Dynex DX-E402 Screenshots
All screenshots below were captured from a Dynex DX-E402 router.
Dynex DX-E402 Dmz Screenshot
![router dmz demilitarized zone port forward](dmz-1804-small.webp)
Dynex DX-E402 Firewall Screenshot
![router firewall security](firewall-2219-small.webp)
Dynex DX-E402 Dynamic Dns Screenshot
![router dynamic dns domain name system](dynamic-dns-2637-small.webp)
Dynex DX-E402 Upnp Screenshot
![router upnp universal plug n play](upnp-4120-small.webp)
Dynex DX-E402 Log Screenshot
![router log data](log-5691-small.webp)
Dynex DX-E402 Port Triggering Screenshot
![router port trigger port triggering](port-triggering-6427-small.webp)
Dynex DX-E402 Remote Management Screenshot
![router remote management](remote-management-7537-small.webp)
Dynex DX-E402 Port Forwarding Screenshot
![port forwarding nat screenshot](port-forwarding-8390-small.webp)
Dynex DX-E402 Reset Screenshot
![router reset factory settings](reset-8492-small.webp)
Dynex DX-E402 Password Screenshot
![router password and username access control](password-8643-small.webp)
Dynex DX-E402 Status Screenshot
![router status mac address internet IP](status-11334-small.webp)
Dynex DX-E402 Setup Screenshot
![router setup](setup-11451-small.webp)
Dynex DX-E402 Routing Screenshot
![router routing settings](routing-11681-small.webp)
Dynex DX-E402 Traffic Statistics Screenshot
![router traffic statistics](traffic-statistics-11924-small.webp)
Dynex DX-E402 Reboot Screenshot
![router reboot](reboot-12047-small.webp)
Dynex DX-E402 Time Setup Screenshot
![router time setup](time-setup-12355-small.webp)
Dynex DX-E402 Wan Screenshot
![router wan setup](wan-14805-small.webp)
Dynex DX-E402 Setup Screenshot
![router setup](setup-15003-small.webp)
Dynex DX-E402 Firmware Screenshot
![router reset firmware factory settings](firmware-15627-small.webp)
Dynex DX-E402 Dhcp Screenshot
![router DHCP lan mac address binding internet settings](dhcp-16977-small.webp)
Dynex DX-E402 Mac Filter Screenshot
![router mac filtering](mac-filter-17495-small.webp)
Dynex DX-E402 Dhcp Client Screenshot
![router dhcp clients](dhcp-client-21242-small.webp)
Dynex DX-E402 Mac Address Screenshot
![router mac address](mac-address-22512-small.webp)
Dynex DX-E402 Address Reservation Screenshot
![router address reservation](address-reservation-23502-small.webp)
Dynex DX-E402 Ping Blocking Screenshot
![router ping blocking](ping-blocking-24221-small.webp)
Dynex DX-E402 Arp Table Screenshot
![router arp table](arp-table-24387-small.webp)
Dynex DX-E402 Url Filter Screenshot
![router url filter](url-filter-28158-small.webp)
Dynex DX-E402 Mac Filter Screenshot
![router mac filtering](mac-filter-31802-small.webp)
Dynex DX-E402 Url Filter Screenshot
![router url filter](url-filter-34816-small.webp)
Dynex DX-E402 General Screenshot
![subManu subModel router](general-38847-small.webp)
Dynex DX-E402 General Screenshot
![subManu subModel router](general-45549-small.webp)
Dynex DX-E402 Device Image Screenshot
![router image](device-image-57502-small.webp)
Dynex DX-E402 Reset Screenshot
![router reset factory settings](reset-75055-small.webp)
This is the screenshots guide for the Dynex DX-E402. We also have the following guides for the same router:
- Dynex DX-E402 - How to change the IP Address on a Dynex DX-E402 router
- Dynex DX-E402 - Dynex DX-E402 User Manual
- Dynex DX-E402 - Dynex DX-E402 Login Instructions
- Dynex DX-E402 - How to change the DNS settings on a Dynex DX-E402 router
- Dynex DX-E402 - How to Reset the Dynex DX-E402
- Dynex DX-E402 - Information About the Dynex DX-E402 Router