Setup WiFi on the Dynex WRTB-239GN

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The Dynex WRTB-239GN router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Dynex WRTB-239GN Guides

This is the wifi guide for the Dynex WRTB-239GN. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Dynex WRTB-239GN

To get started configuring the Dynex WRTB-239GN WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Dynex WRTB-239GN, follow our Dynex WRTB-239GN Login Guide.

Find the WiFi Settings on the Dynex WRTB-239GN

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Dynex WRTB-239GN router.

You start on the Status page of the Dynex WRTB-239GN router. To setup the WiFi section of the router, click the link in the left sidebar labeled Channel and SSID. This is underneath the blue heading of Wireless.

Change the WiFi Settings on the Dynex WRTB-239GN

router Wi-Fi channel ssid mode
This is the wifi channel page from your Dynex WRTB-239GN router.
  • Wireless Channel - Make sure you are using channel 1,6, or 11. To learn why you should use one of these three channels, read our WiFi Channels Guide.
  • SSID - This is the name you create to identify your network. Enter anything you like here but avoid personal information. Learn more by reading our Wireless Names Guide.
  • Tick the blue Apply Changes button.
  • Now, click the link in the left sidebar labeled Security.
router wifi security wireless
This is the wifi security page from your Dynex WRTB-239GN router.
  • Security Mode - Choose WPA-PSK (no server). This is the best security available for home networks. Check out our guide titled WEP vs. WPA for more info.
  • Authentication - Select the option of WPA2-PSK.
  • Pre-Shared Key (PSK) - This is the password you use to grant access to your network. We recommend using a minimum of 14-20 characters with a mix of numbers, symbols, and letters. Read more at our Choosing a Strong Password Guide.
  • Click the Apply Changes button when you are finished.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Dynex WRTB-239GN Info

Don't forget about our other Dynex WRTB-239GN info that you might be interested in.

This is the wifi guide for the Dynex WRTB-239GN. We also have the following guides for the same router: