How to change the IP Address on a Edimax AR-7084gB router

This page shows how to change the LAN IP Address on the Edimax AR-7084gB router.

Other Edimax AR-7084gB Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Edimax AR-7084gB

To get started configuring the Edimax AR-7084gB LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Edimax AR-7084gB, follow our Edimax AR-7084gB Login Guide.

Change the LAN IP Address on a Edimax AR-7084gB

If you followed our login guide above then you should see this screen.

Once you have successfully logged into the Edimax AR-7084gB you see the Status page. When you need to change your IP Address, the address you are looking at while inside the network, click the choice a the top of the page labeled Interface Setup. Then make sure to click LAN, it will be smaller and under the larger heading of Interface Setup.

Configure the LAN section of your Edimax AR-7084gB

Once on this new page, find and click the box marked IP Address. Enter your new IP Address here. We would like to suggest using the address of 192.168.0.1 for your Router.

Make sure to leave the Subnet Mask at 255.255.255.0, and the DHCP Server enabled.

When you finish, click Save, at the bottom of the page.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Edimax AR-7084gB Info

Don't forget about our other Edimax AR-7084gB info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.