How to change the IP Address on a Edimax BR-6204WLg router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Edimax BR-6204WLg router.

Other Edimax BR-6204WLg Guides

This is the ip address guide for the Edimax BR-6204WLg. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Edimax BR-6204WLg

To get started configuring the Edimax BR-6204WLg LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Edimax BR-6204WLg, follow our Edimax BR-6204WLg Login Guide.

Change the LAN IP Address on a Edimax BR-6204WLg

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Edimax BR-6204WLg router.

Once you have finished logging into the Edimax BR-6204WLg you see the Home page. When changing your IP Address, the local address you are on while inside the network, click General Setup. Then, click the big box labeled LAN.

Configure the LAN section of your Edimax BR-6204WLg

router setup
This is the setup page from your Edimax BR-6204WLg router.

Now we are on the correct page to change the IP Address. Click the box marked IP Address and type in your new address. We would like to recommend using the IP Address of 192.168.0.1 for your Router.

Make sure you don't change the Subnet Mask, this should stay at 255.255.255.0 at all times.

When you are finished changing things, click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Edimax BR-6204WLg Info

Don't forget about our other Edimax BR-6204WLg info that you might be interested in.

This is the ip address guide for the Edimax BR-6204WLg. We also have the following guides for the same router: