How to change the IP Address on a Edimax BR-6216Mg router

This page shows how to change the LAN IP Address on the Edimax BR-6216Mg router.

Other Edimax BR-6216Mg Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Edimax BR-6216Mg

To get started configuring the Edimax BR-6216Mg LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Edimax BR-6216Mg, follow our Edimax BR-6216Mg Login Guide.

Change the LAN IP Address on a Edimax BR-6216Mg

If you followed our login guide above then you should see this screen.

After you have logged into the Edimax BR-6216Mg you begin on the Main Menu. When you need to change your IP Address, this is the address you are looking at while inside your network, click the choice on the left labeled LAN.

Configure the LAN section of your Edimax BR-6216Mg

This takes you to the LAN Settings page. Find the box marked IP Address and enter the new address you have picked out for your Router. We would like to suggest using the address of 192.168.0.1

The Subnet Mask needs to be left at 255.255.255.0, except in rare cases. The DHCP Server should also be left enabled, which allows the Router to choose these for you.

Once you have finished making changes, click the box at the bottom labeled Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Edimax BR-6216Mg Info

Don't forget about our other Edimax BR-6216Mg info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.