How to change the DNS settings on a Edimax BR6228nC router

This page shows how to change the DNS settings on the Edimax BR6228nC router.

Other Edimax BR6228nC Guides

What is the DNS setting on a Router

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:

This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

If you want to use Google Public DNS, use the following settings:

If you want to use OpenDNS, use the following settings:

Login To The Edimax BR6228nC

To get started configuring the Edimax BR6228nC DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Edimax BR6228nC, follow our Edimax BR6228nC Login Guide.

Change the DNS settings on a Edimax BR6228nC

If you followed our login guide above then you should see this screen.

Beginning on the Home page of the Edimax BR6228nC click the choice at the top labeled General Setup. Under that choose the option of WAN.

Configure the DNS section of your Edimax BR6228nC

On this page, if your computer has a Dynamic IP address click the radio button labeled Dynamic IP. If your computer has a Static IP address, click the radio button labeled Static IP.

No matter which section you are in, tick the radio button labeled Use the following IP address.

In the DNS 1 address box, enter the primary address of the DNS server you want to use.

Under that in the DNS 2 address, enter the secondary address of the DNS server you picked.

We recommend leaving the third box empty, a third address is not needed.

Click Apply and you are finished.

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.

Other Edimax BR6228nC Info

Don't forget about our other Edimax BR6228nC info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.