This page shows how to change the LAN IP Address on the Ericsson W35 router.
Other Ericsson W35 Guides
This is the ip address guide for the Ericsson W35. We also have the following guides for the same router:
- Ericsson W35 - Ericsson W35 User Manual
- Ericsson W35 - Ericsson W35 Login Instructions
- Ericsson W35 - How to change the DNS settings on a Ericsson W35 router
- Ericsson W35 - Setup WiFi on the Ericsson W35
- Ericsson W35 - How to Reset the Ericsson W35
- Ericsson W35 - Information About the Ericsson W35 Router
- Ericsson W35 - Ericsson W35 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Ericsson W35
To get started configuring the Ericsson W35 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Ericsson W35, follow our Ericsson W35 Login Guide.
Change the LAN IP Address on a Ericsson W35
If you followed our login guide above then you should see this screen.
After logging into the Ericsson W35 you be on the Main Menu. When changing your IP Address, the address you can see while inside your network, click the choice on the left labeled LAN.
Configure the LAN section of your Ericsson W35
Next, place your cursor in the box marked IP Address and enter the IP Address you have picked out for your Router. This particular screenshot shows the address of 192.168.1.1, this is a good choice, we recommend that you use this also.
Make sure to leave the Subnet Mask at 255.255.255.0, and the DHCP Server is enabled.
When you are finished making changes, click the box marked Apply.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Ericsson W35 Info
Don't forget about our other Ericsson W35 info that you might be interested in.
This is the ip address guide for the Ericsson W35. We also have the following guides for the same router:
- Ericsson W35 - Ericsson W35 User Manual
- Ericsson W35 - Ericsson W35 Login Instructions
- Ericsson W35 - How to change the DNS settings on a Ericsson W35 router
- Ericsson W35 - Setup WiFi on the Ericsson W35
- Ericsson W35 - How to Reset the Ericsson W35
- Ericsson W35 - Information About the Ericsson W35 Router
- Ericsson W35 - Ericsson W35 Screenshots