This page shows how to change the LAN IP Address on the FRITZ BOX WLAN 7170-EN router.
Other FRITZ BOX WLAN 7170-EN Guides
This is the ip address guide for the FRITZ BOX WLAN 7170-EN. We also have the following guides for the same router:
- FRITZ BOX WLAN 7170-EN - FRITZ BOX WLAN 7170-EN Login Instructions
- FRITZ BOX WLAN 7170-EN - FRITZ BOX WLAN 7170-EN User Manual
- FRITZ BOX WLAN 7170-EN - Setup WiFi on the FRITZ BOX WLAN 7170-EN
- FRITZ BOX WLAN 7170-EN - How to Reset the FRITZ BOX WLAN 7170-EN
- FRITZ BOX WLAN 7170-EN - Information About the FRITZ BOX WLAN 7170-EN Router
- FRITZ BOX WLAN 7170-EN - FRITZ BOX WLAN 7170-EN Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The FRITZ BOX WLAN 7170-EN
To get started configuring the FRITZ BOX WLAN 7170-EN LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the FRITZ BOX WLAN 7170-EN, follow our FRITZ BOX WLAN 7170-EN Login Guide.
Change the LAN IP Address on a FRITZ BOX WLAN 7170-EN
If you followed our login guide above then you should see this screen.
Once you have successfully logged into the FRITZ WLAN 7170 you begin on the Contents page. When changing the IP Address on your Router you need to click the choice on the left labeled Advanced Settings. Then choose System and finally, Network.
Configure the LAN section of your FRITZ BOX WLAN 7170-EN
On this page labeled IP Settings, you need to click OK or the writing symbol, then find the box labeled IP Address and enter the address you have chosen for your Router. One choice is the address of 192.168.0.1
Please leave all the other settings alone, and don't forget to save before you exit.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other FRITZ BOX WLAN 7170-EN Info
Don't forget about our other FRITZ BOX WLAN 7170-EN info that you might be interested in.
This is the ip address guide for the FRITZ BOX WLAN 7170-EN. We also have the following guides for the same router:
- FRITZ BOX WLAN 7170-EN - FRITZ BOX WLAN 7170-EN Login Instructions
- FRITZ BOX WLAN 7170-EN - FRITZ BOX WLAN 7170-EN User Manual
- FRITZ BOX WLAN 7170-EN - Setup WiFi on the FRITZ BOX WLAN 7170-EN
- FRITZ BOX WLAN 7170-EN - How to Reset the FRITZ BOX WLAN 7170-EN
- FRITZ BOX WLAN 7170-EN - Information About the FRITZ BOX WLAN 7170-EN Router
- FRITZ BOX WLAN 7170-EN - FRITZ BOX WLAN 7170-EN Screenshots