This page shows how to change the LAN IP Address on the GetNet GR-534W router.
Other GetNet GR-534W Guides
This is the ip address guide for the GetNet GR-534W. We also have the following guides for the same router:
- GetNet GR-534W - GetNet GR-534W User Manual
- GetNet GR-534W - GetNet GR-534W Login Instructions
- GetNet GR-534W - How to change the DNS settings on a GetNet GR-534W router
- GetNet GR-534W - Setup WiFi on the GetNet GR-534W
- GetNet GR-534W - How to Reset the GetNet GR-534W
- GetNet GR-534W - Information About the GetNet GR-534W Router
- GetNet GR-534W - GetNet GR-534W Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The GetNet GR-534W
To get started configuring the GetNet GR-534W LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the GetNet GR-534W, follow our GetNet GR-534W Login Guide.
Change the LAN IP Address on a GetNet GR-534W
If you followed our login guide above then you should see this screen.
After logging into the GetNet GR-534W you start on the Statistics page. To change your Router IP Address, the address you are actually looking at while inside your network, click the tab on the top of the page labeled Internet. Then, in the little blue line beneath this, click LAN.
Configure the LAN section of your GetNet GR-534W
You should now be on the LAN Interface Setup page. Click the box marked IP Address and enter your new address here. In this screenshot, someone has used 192.168.1.1, this is a very good choice, we recommend that you use this also.
Make sure to leave the Subnet Mask at 255.255.255.0
Lastly, when you are finished making changes, make sure to save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other GetNet GR-534W Info
Don't forget about our other GetNet GR-534W info that you might be interested in.
This is the ip address guide for the GetNet GR-534W. We also have the following guides for the same router:
- GetNet GR-534W - GetNet GR-534W User Manual
- GetNet GR-534W - GetNet GR-534W Login Instructions
- GetNet GR-534W - How to change the DNS settings on a GetNet GR-534W router
- GetNet GR-534W - Setup WiFi on the GetNet GR-534W
- GetNet GR-534W - How to Reset the GetNet GR-534W
- GetNet GR-534W - Information About the GetNet GR-534W Router
- GetNet GR-534W - GetNet GR-534W Screenshots