This page shows how to change the LAN IP Address on the Green Packet DT-235 router.
Other Green Packet DT-235 Guides
This is the ip address guide for the Green Packet DT-235. We also have the following guides for the same router:
- Green Packet DT-235 - Green Packet DT-235 Login Instructions
- Green Packet DT-235 - How to change the DNS settings on a Green Packet DT-235 router
- Green Packet DT-235 - Setup WiFi on the Green Packet DT-235
- Green Packet DT-235 - How to Reset the Green Packet DT-235
- Green Packet DT-235 - Green Packet DT-235 Screenshots
- Green Packet DT-235 - Information About the Green Packet DT-235 Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Green Packet DT-235
To get started configuring the Green Packet DT-235 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Green Packet DT-235, follow our Green Packet DT-235 Login Guide.
Change the LAN IP Address on a Green Packet DT-235
If you followed our login guide above then you should see this screen.
Now that you have finished logging into the GreenPacket DT-235 router you should see a page like the one you see above. To properly change your LAN IP address click the option of Network. This box has a picture of three monitors or boxes on it.
A sidebar menu will now appear to the left side of the page. Click the link titled Network Mode.
Configure the LAN section of your Green Packet DT-235
This directs you to a page a lot like the one you see above.
The only thing I want you to do on this page is find the four boxes labeled LAN IP Address. Now go ahead and enter the new IP address you want to use.
Don't make any other changes to this page. Just click the Apply button at the bottom of the page.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Green Packet DT-235 Info
Don't forget about our other Green Packet DT-235 info that you might be interested in.
This is the ip address guide for the Green Packet DT-235. We also have the following guides for the same router:
- Green Packet DT-235 - Green Packet DT-235 Login Instructions
- Green Packet DT-235 - How to change the DNS settings on a Green Packet DT-235 router
- Green Packet DT-235 - Setup WiFi on the Green Packet DT-235
- Green Packet DT-235 - How to Reset the Green Packet DT-235
- Green Packet DT-235 - Green Packet DT-235 Screenshots
- Green Packet DT-235 - Information About the Green Packet DT-235 Router