Have you tried to login to the Hama 62731 and are unable to do so? You might need to reset the Hama 62731 router back to the original factory defaults.
This is not the same thing as a reboot. When you reboot your router you cycle the power to the unit. When you reset your router you take all the settings an return them all to factory defaults.
Warning: A reset will erase every setting you have ever changed on this device. We strongly recommend creating a list of the settings you might of changed during the lifetime of this particular Hama 62731 router. Some of these changes might be:
- The router's main username and password.
- The WiFi information such as SSID and Internet password.
- If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. You need to call your local ISP for these specific details.
- Write down any other changes such as port forwards or IP address changes as well.
Other Hama 62731 Guides
This is the reset router guide for the Hama 62731. We also have the following guides for the same router:
- Hama 62731 - How to change the IP Address on a Hama 62731 router
- Hama 62731 - Hama 62731 Login Instructions
- Hama 62731 - How to change the DNS settings on a Hama 62731 router
- Hama 62731 - Setup WiFi on the Hama 62731
- Hama 62731 - Information About the Hama 62731 Router
- Hama 62731 - Hama 62731 Screenshots
Reset the Hama 62731
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Normally the physical reset button is on the back panel of the router just like the image below. Go ahead and locate the reset button for the Hama 62731 router.
While the router remains on take a small sharp object such as a straightened paperclip and press down on the reset button for at least 10 seconds. A lot of routers have it so if you don't hold the reset down for the entire amount of time it only reboots the device instead of resetting it, so be aware.
Remember a reset like this one is going to erase every single setting you have ever changed on your device. The entire router needs to be re-configured. We strongly recommend this be your last course of action. Try other methods of accessing your router before you decide to reset.
Login to the Hama 62731
After you've reset the Hama 62731 router you should log into it. This is accomplished by using the factory default username and password. Not sure where you can find these? We have them listed for your use in our Login Guide.
Tip: If the defaults aren't working for you it might be because the reset button wasn't held down for long enough.
Change Your Password
Once you've reset and logged into your router we suggest setting a new password for it. This can be anything you like, however keep in mind that a strong password includes no personal information and is 14-20 characters in length. For more help check out our Choosing a Strong Password Guide.
Tip: Prevent yourself from losing your new password by writing it on a sticky note and putting it on the bottom of your router.
Setup WiFi on the Hama 62731
You can now begin the reconfiguration process. We have a lot of guides to choose from. One I recommend you check out is the How to Setup WiFi on the Hama 62731 guide. It takes you through the steps on how to secure your wireless connection.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Hama 62731 Help
Be sure to check out our other Hama 62731 info that you might be interested in.
This is the reset router guide for the Hama 62731. We also have the following guides for the same router:
- Hama 62731 - How to change the IP Address on a Hama 62731 router
- Hama 62731 - Hama 62731 Login Instructions
- Hama 62731 - How to change the DNS settings on a Hama 62731 router
- Hama 62731 - Setup WiFi on the Hama 62731
- Hama 62731 - Information About the Hama 62731 Router
- Hama 62731 - Hama 62731 Screenshots