This page shows how to change the LAN IP Address on the Hamlet HRDSL742W router.
Other Hamlet HRDSL742W Guides
This is the ip address guide for the Hamlet HRDSL742W. We also have the following guides for the same router:
- Hamlet HRDSL742W - Hamlet HRDSL742W User Manual
- Hamlet HRDSL742W - Hamlet HRDSL742W Login Instructions
- Hamlet HRDSL742W - How to change the DNS settings on a Hamlet HRDSL742W router
- Hamlet HRDSL742W - Setup WiFi on the Hamlet HRDSL742W
- Hamlet HRDSL742W - How to Reset the Hamlet HRDSL742W
- Hamlet HRDSL742W - Information About the Hamlet HRDSL742W Router
- Hamlet HRDSL742W - Hamlet HRDSL742W Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Hamlet HRDSL742W
To get started configuring the Hamlet HRDSL742W LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Hamlet HRDSL742W, follow our Hamlet HRDSL742W Login Guide.
Change the LAN IP Address on a Hamlet HRDSL742W
If you followed our login guide above then you should see this screen.
After logging into the Hamlet HRDSL742W you see the Status page. When you need to change your IP Address, this is the address you see while inside your network, click the choice on the left labeled Configuration, then LAN, right below that.
Configure the LAN section of your Hamlet HRDSL742W
Next, place your cursor in the box marked IP Address and enter the new address you have chosen for your Router. We would like to suggest using the address of 192.168.0.1
The SubNetmask should always remain at 255.255.255.0
Finally, when you are finished, click Apply.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Hamlet HRDSL742W Info
Don't forget about our other Hamlet HRDSL742W info that you might be interested in.
This is the ip address guide for the Hamlet HRDSL742W. We also have the following guides for the same router:
- Hamlet HRDSL742W - Hamlet HRDSL742W User Manual
- Hamlet HRDSL742W - Hamlet HRDSL742W Login Instructions
- Hamlet HRDSL742W - How to change the DNS settings on a Hamlet HRDSL742W router
- Hamlet HRDSL742W - Setup WiFi on the Hamlet HRDSL742W
- Hamlet HRDSL742W - How to Reset the Hamlet HRDSL742W
- Hamlet HRDSL742W - Information About the Hamlet HRDSL742W Router
- Hamlet HRDSL742W - Hamlet HRDSL742W Screenshots