This article covers how to reset the Hitron CGN3552 router back to factory default settings. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.
Other Hitron CGN3552 Guides
This is the reset router guide for the Hitron CGN3552. We also have the following guides for the same router:
Recover Password in Hitron CGN3552
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Hitron CGN3552
Most routers have a small button on either the back or the bottom. Look for something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Keep in mind that this will completely reset your Hitron CGN3552 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Hitron CGN3552
After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the CGN3552 Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Hitron CGN3552 Guides
This isn't our only Hitron CGN3552 guide. We also have the following guides for this router.
This is the reset router guide for the Hitron CGN3552. We also have the following guides for the same router: