Setup Router logo in white Setup router name logo in white
Get Software

Reset the Huawei B525s-95a

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Huawei B525s-95a router to factory default settings. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: This is not a step to be taken lightly. A router reset will affect the following settings:

  • The router's username and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Huawei B525s-95a Guides

This is the reset router guide for the Huawei B525s-95a 11.230.03.01.1133. We also have the following guides for the same router:

Recover Password in Huawei B525s-95a

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Huawei B525s-95a

You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not worry about holding the button down too long; this is harmless.

Remember, this will erase everything you have previously done to this Huawei B525s-95a router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Huawei B525s-95a

After you are finished resetting your router, you need to login in using the original factory username and password. You can find all of the information that you need in our B525s-95a Login Guide.

Change Your Password

Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other Huawei B525s-95a Guides

We have collected a lot of information about the Huawei B525s-95a router. You can find some of our additional content here.

This is the reset router guide for the Huawei B525s-95a 11.230.03.01.1133. We also have the following guides for the same router: