This is the reset guide for the Huawei HG633 router. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's username and password are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Huawei HG633 Guides
This is the reset router guide for the Huawei HG633 V100R001C105B013 TE Data. We also have the following guides for the same router:
Recover Password in Huawei HG633
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the Huawei HG633
Most routers have a small button on either the back or the bottom. Look for something that looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Keep in mind that this will completely reset your Huawei HG633 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the Huawei HG633
Now you need to log in using the factory default username and password. We have a HG633 Login Guide with all this information ready for you.
Change Your Password
You need to change your router's default password after you log in for the first time. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Huawei HG633 Guides
We have collected a lot of information about the Huawei HG633 router. You can find some of our additional content here.
This is the reset router guide for the Huawei HG633 V100R001C105B013 TE Data. We also have the following guides for the same router: