This guide shows you how to reset your Humax BGW320-500 router to factory default settings. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.
Warning: This is not a step to be taken lightly. The following settings in your router will be changed:
- The router's username and password are reset to factory defaults.
- Your WiFi name and password are reset.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Humax BGW320-500 Guides
This is the reset router guide for the Humax BGW320-500 2.14.4 AT&T. We also have the following guides for the same router:
- Humax BGW320-500 2.14.4 AT&T - Login to the Humax BGW320-500
- Humax BGW320-500 2.14.4 AT&T - Information About the Humax BGW320-500 Router
- Humax BGW320-500 3.19.5 AT&T - Information About the Humax BGW320-500 Router
- Humax BGW320-500 3.19.5 AT&T - Reset the Humax BGW320-500
- Humax BGW320-500 3.19.5 AT&T - Login to the Humax BGW320-500
Recover Password in Humax BGW320-500
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Humax BGW320-500
Usually there is a reset button located on the back or bottom of a router. Look for something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. You can hold the button down as long as you like, it will not hurt anything.
Remember, this will totally reset your Humax BGW320-500 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Humax BGW320-500
After you are finished resetting your router, you need to login in using the original factory username and password. Our BGW320-500 Login Guide has all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Humax BGW320-500 Guides
This isn't our only Humax BGW320-500 guide. We also have the following guides for this router.
This is the reset router guide for the Humax BGW320-500 2.14.4 AT&T. We also have the following guides for the same router:
- Humax BGW320-500 2.14.4 AT&T - Login to the Humax BGW320-500
- Humax BGW320-500 2.14.4 AT&T - Information About the Humax BGW320-500 Router
- Humax BGW320-500 3.19.5 AT&T - Information About the Humax BGW320-500 Router
- Humax BGW320-500 3.19.5 AT&T - Reset the Humax BGW320-500
- Humax BGW320-500 3.19.5 AT&T - Login to the Humax BGW320-500