This guide shows you how to reset your Innacomm RG4332 router. A router reset is a much bigger deal than a router reboot. Turning a router off and back on again causes a reboot. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Innacomm RG4332 Guides
This is the reset router guide for the Innacomm RG4332. We also have the following guides for the same router:
Recover Password in Innacomm RG4332
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Innacomm RG4332
Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Innacomm RG4332 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Innacomm RG4332
Now you need to log in using the factory default username and password. You can find all of the information that you need in our RG4332 Login Guide.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other Innacomm RG4332 Guides
Here are some of our other Innacomm RG4332 guides that you might be interested in.
This is the reset router guide for the Innacomm RG4332. We also have the following guides for the same router: