This page shows how to change the LAN IP Address on the Inteno X5671B router.
Other Inteno X5671B Guides
This is the ip address guide for the Inteno X5671B. We also have the following guides for the same router:
- Inteno X5671B - Inteno X5671B User Manual
- Inteno X5671B - Inteno X5671B Login Instructions
- Inteno X5671B - How to change the DNS settings on a Inteno X5671B router
- Inteno X5671B - Setup WiFi on the Inteno X5671B
- Inteno X5671B - How to Reset the Inteno X5671B
- Inteno X5671B - Information About the Inteno X5671B Router
- Inteno X5671B - Inteno X5671B Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Inteno X5671B
To get started configuring the Inteno X5671B LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Inteno X5671B, follow our Inteno X5671B Login Guide.
Change the LAN IP Address on a Inteno X5671B
If you followed our login guide above then you should see this screen.
To change your Router IP Address, the address you can see while inside your network, first log into the Inteno X5671B. This places you on the Device Info page. Next, click the Advanced Setup choice on the left, then LAN.
Configure the LAN section of your Inteno X5671B
You are now on the Local Area Network (LAN) Setup page. Place your cursor in the box marked IP Address and enter the new address here. Our suggestion for a good IP Address is 192.168.0.1 You need to leave the Subnet Mask at 255.255.255.0 The DHCP Server should remain enabled also.
Finally, when you are done, click the box in the bottom right corner labeled Save/Reboot.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Inteno X5671B Info
Don't forget about our other Inteno X5671B info that you might be interested in.
This is the ip address guide for the Inteno X5671B. We also have the following guides for the same router:
- Inteno X5671B - Inteno X5671B User Manual
- Inteno X5671B - Inteno X5671B Login Instructions
- Inteno X5671B - How to change the DNS settings on a Inteno X5671B router
- Inteno X5671B - Setup WiFi on the Inteno X5671B
- Inteno X5671B - How to Reset the Inteno X5671B
- Inteno X5671B - Information About the Inteno X5671B Router
- Inteno X5671B - Inteno X5671B Screenshots