Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Jensen Scandinavia AL29150

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

If you have tried unsuccessfully to login to the Jensen Scandinavia AL29150v6 router interface it might be time to consider a reset. A reset differs from a reboot. When you reboot a router you cycle the power to the unit. When you reset a router take all the settings and return them all to how they were when they left the factory.

Warning: This router reset is a big step and should not be taken lightly. It is a good idea to make a list of all the settings you have changed in the past before continuing. Some of the possible settings that may be changed are:

  • The router username and password.
  • The network name and password.
  • If this is a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. Call your ISP for these details.
  • Have you made any other changes that you remember? How about port forwards or IP address changes? Write all of these down as well.

Other Jensen Scandinavia AL29150 Guides

This is the reset router guide for the Jensen Scandinavia AL29150 v6. We also have the following guides for the same router:

Reset the Jensen Scandinavia AL29150

Below is an image of the back panel of the Jensen Scandinavia AL29150v6 router. Notice where the reset button is located.

router reset factory settings
This is the reset page from your Jensen Scandinavia AL29150 router.

While the router is on take a straightened paperclip and press down on the reset button for about 10 seconds. This begins the reset process. If you don't hold this button down long enough you might end up only rebooting the router instead of the desired reset.

Warning: Do not unplug or turn off the router during this process. Doing so could cause permanent damage to the router, making it useless.

Remember a reset like this one is going to erase every single setting you have ever changed in the history of the router. Please try other troubleshooting methods before you continue.

Login to the Jensen Scandinavia AL29150

Now let's login to the Jensen Scandinavia AL29150v6 router. When you do this make sure to use the default factory IP address, username and password. We have found these for you and included them in our Jensen Scandinavia AL29150v6 Login Guide.

Tip: If the default values didn't work it might be that you didn't hold the reset button down for long enough. Try again but hold the reset button down for a little longer.

Change Your Password

Don't leave default passwords alone you need to change these. Default passwords are notoriously easy to crack. Follow the guidelines in our Choosing a Strong Password guide to create a nice strong password for your router settings.

Tip: If you thing you might lose and/or forget this password try writing it down on a piece of paper and attaching it to the bottom of the router for next time.

Setup WiFi on the Jensen Scandinavia AL29150v6

It is time to reconfigure the router. Sometimes this means a lot of settings and sometimes it means simply the WiFi settings. For an easy to follow WiFi guide check out our Jensen Scandinavia AL29150v6 WiFi Instructions.

Jensen Scandinavia AL29150 Help

Be sure to check out our other Jensen Scandinavia AL29150 info that you might be interested in.

This is the reset router guide for the Jensen Scandinavia AL29150 v6. We also have the following guides for the same router: