Reset the KAON Media DIGI

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This article covers how to reset the KAON Media DIGI router back to factory default settings. This is a much bigger deal than a router reboot. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's login and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other KAON Media DIGI Guides

This is the reset router guide for the KAON Media DIGI. We also have the following guides for the same router:

Recover Password in KAON Media DIGI

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the KAON Media DIGI

There is usually a small reset button located on either the back or the bottom of a router. This is what a typical reset button looks like:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You can hold the button down as long as you like, it will not hurt anything.

Remember, this will totally reset your KAON Media DIGI router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the KAON Media DIGI

Now you need to log in using the factory default username and password. Just follow our DIGI Login Guide to find all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.

Other KAON Media DIGI Guides

This isn't our only KAON Media DIGI guide. We also have the following guides for this router.

This is the reset router guide for the KAON Media DIGI. We also have the following guides for the same router: