Have you been trying to login to the KEEBOX W150NR router interface but been unable to do so? It might be time to consider a reset. The type of reset I will be explaining in this guide is not simply a reboot but a factory default reset. A reboot is simply a way of cycling the power to the device. A factory reset takes all the settings you have changed in the past and returns them all to how they were when they left the factory.
Warning: A factory reset is a big step and should be taken as such. A factory reset should only be done after you have exhausted your other options. It's also a good idea to make a list of all the settings you may of changed in the past. These settings will include:
- If this is a DSL router you will need to re-enter the Internet Service Provider (ISP) username and password. Call your local ISP for these details.
- The router's main username and password used to access the interface.
- The network SSID and password.
- Any other settings such as port forwards or IP address changes.
Other KEEBOX W150NR Guides
This is the reset router guide for the KEEBOX W150NR. We also have the following guides for the same router:
- KEEBOX W150NR - Setup WiFi on the KEEBOX W150NR
- KEEBOX W150NR - How to change the IP Address on a KEEBOX W150NR router
- KEEBOX W150NR - KEEBOX W150NR Login Instructions
- KEEBOX W150NR - KEEBOX W150NR User Manual
- KEEBOX W150NR - KEEBOX W150NR Screenshots
- KEEBOX W150NR - Information About the KEEBOX W150NR Router
Reset the KEEBOX W150NR
Take a look at the image below. I have circled the location of the reset button.
While the router is on take a small sharp object such as a straight paperclip and press down on the reset button for at least 10 seconds. This begins the reset process. Be patient this could take a couple minutes to complete.
Warning: Do not unplug or turn off the device during the actual reset process. Doing so could result in permanent damage to the unit.
Remember a reset is a big step and erases all previously configured settings. Please consider other options first.
Login to the KEEBOX W150NR
Once the reset is finished login to the KEEBOX W150NR router. To do this you need to use the default values. I have found these for you and included them in our KEEBOX W150NR Login Guide.
Tip: Did the default values not work? You may of only rebooted the system. Try the reset again but make sure to hold the reset button down for a little longer this time.
Change Your Password
It is always a good idea to change the default passwords as soon as possible. For a little extra help use our Choosing a Strong Password guide.
Tip: Don't lose this password. Try writing it on a sticky-note and attaching it to the bottom of the router for future reference.
Setup WiFi on the KEEBOX W150NR
Finally I want to link you to our KEEBOX W150NR WiFi Instructions. Don't forget to setup the router's wireless settings as these have been erased as well during the reset.
KEEBOX W150NR Help
Be sure to check out our other KEEBOX W150NR info that you might be interested in.
This is the reset router guide for the KEEBOX W150NR. We also have the following guides for the same router:
- KEEBOX W150NR - Setup WiFi on the KEEBOX W150NR
- KEEBOX W150NR - How to change the IP Address on a KEEBOX W150NR router
- KEEBOX W150NR - KEEBOX W150NR Login Instructions
- KEEBOX W150NR - KEEBOX W150NR User Manual
- KEEBOX W150NR - KEEBOX W150NR Screenshots
- KEEBOX W150NR - Information About the KEEBOX W150NR Router