This page shows how to change the LAN IP Address on the Level One WBR 5400 router.
Other Level One WBR 5400 Guides
This is the ip address guide for the Level One WBR 5400. We also have the following guides for the same router:
- Level One WBR 5400 - Level One WBR 5400 User Manual
- Level One WBR 5400 - Level One WBR 5400 Login Instructions
- Level One WBR 5400 - Setup WiFi on the Level One WBR 5400
- Level One WBR 5400 - How to Reset the Level One WBR 5400
- Level One WBR 5400 - Information About the Level One WBR 5400 Router
- Level One WBR 5400 - Level One WBR 5400 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Level One WBR 5400
To get started configuring the Level One WBR 5400 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Level One WBR 5400, follow our Level One WBR 5400 Login Guide.
Change the LAN IP Address on a Level One WBR 5400
If you followed our login guide above then you should see this screen.
When you have logged into the LevelOne WBR-5400 you see the System Status page. To change your IP Address, the address you can see while inside your network, click the choice at the top of the page labeled Basic Setting, it is quite small, and under the word LevelOne. Next, click Primary Setup on the left side of the screen, in dark blue.
Configure the LAN section of your Level One WBR 5400
The very first box on this page should be labeled LAN IP Address. Place your cursor here, and enter the new address you have chosen for your Router. We don't recommend the use of the address in this screenshot. We would suggest using 192.168.0.1 instead.
Please leave the My Subnet Mask at 255.255.255.0
Finally, when you are done making changes, click the button in the lower left corner labeled Save.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Level One WBR 5400 Info
Don't forget about our other Level One WBR 5400 info that you might be interested in.
This is the ip address guide for the Level One WBR 5400. We also have the following guides for the same router:
- Level One WBR 5400 - Level One WBR 5400 User Manual
- Level One WBR 5400 - Level One WBR 5400 Login Instructions
- Level One WBR 5400 - Setup WiFi on the Level One WBR 5400
- Level One WBR 5400 - How to Reset the Level One WBR 5400
- Level One WBR 5400 - Information About the Level One WBR 5400 Router
- Level One WBR 5400 - Level One WBR 5400 Screenshots