This page shows how to change the LAN IP Address on the Level One WBR 6001 router.
Other Level One WBR 6001 Guides
This is the ip address guide for the Level One WBR 6001. We also have the following guides for the same router:
- Level One WBR 6001 - Level One WBR 6001 User Manual
- Level One WBR 6001 - Level One WBR 6001 Login Instructions
- Level One WBR 6001 - Setup WiFi on the Level One WBR 6001
- Level One WBR 6001 - How to Reset the Level One WBR 6001
- Level One WBR 6001 - Information About the Level One WBR 6001 Router
- Level One WBR 6001 - Level One WBR 6001 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Level One WBR 6001
To get started configuring the Level One WBR 6001 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Level One WBR 6001, follow our Level One WBR 6001 Login Guide.
Change the LAN IP Address on a Level One WBR 6001
If you followed our login guide above then you should see this screen.
Once you have logged into the LevelOne WBR-6001 you see the System Status page. When you need to change your IP Address, the address you can see while you are inside your network, click the tab at the top of the page labeled ADMINISTRATOR's MAIN MENU . This should bring up some new choices below this. Click the one labeled Basic Setting, then, on the left click Primary Setup.
Configure the LAN section of your Level One WBR 6001
Next, place your cursor in the box marked LAN IP Address and enter the new address of your choice here. We recommend using the same address as in this screenshot, 192.168.0.1
Finally, click Save when you are done making changes.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Level One WBR 6001 Info
Don't forget about our other Level One WBR 6001 info that you might be interested in.
This is the ip address guide for the Level One WBR 6001. We also have the following guides for the same router:
- Level One WBR 6001 - Level One WBR 6001 User Manual
- Level One WBR 6001 - Level One WBR 6001 Login Instructions
- Level One WBR 6001 - Setup WiFi on the Level One WBR 6001
- Level One WBR 6001 - How to Reset the Level One WBR 6001
- Level One WBR 6001 - Information About the Level One WBR 6001 Router
- Level One WBR 6001 - Level One WBR 6001 Screenshots