Have you tried to login to the LevelOne WBR-6001 router without success? It might be time to consider a reset. A reset like this is not the same thing as a reboot. When I use the term reboot I am referring to a simple cycle in power to the device. When I use the term reset I am referring to a full factory restore of all settings. This means every setting you have ever changed is erased and returned to how it was when you bought the router new.
Warning: Resetting this router is a big step. Please don't take this lightly. We strongly recommend making a list of all the settings you have ever changed in the past. These settings include the:
- The router's main username and password.
- The Internet SSID, encryption and password.
- If this happens to be a DSL router you need to re-enter the Internet Service Provider (ISP) username and password. Call your local provider for these details.
- Write down any other changes you can think about. These could include anything from port forwards or IP addresses.
Other Level One WBR 6001 Guides
This is the reset router guide for the Level One WBR 6001. We also have the following guides for the same router:
- Level One WBR 6001 - How to change the IP Address on a Level One WBR 6001 router
- Level One WBR 6001 - Level One WBR 6001 User Manual
- Level One WBR 6001 - Level One WBR 6001 Login Instructions
- Level One WBR 6001 - Setup WiFi on the Level One WBR 6001
- Level One WBR 6001 - Information About the Level One WBR 6001 Router
- Level One WBR 6001 - Level One WBR 6001 Screenshots
Reset the Level One WBR 6001
Below is an image of the front panel. I have circled the reset button for you in red.
While the router is on, take a straightened paperclip or other similar object and press down on the reset button for at least 5 seconds. Until the Status light blinks approximately 5 times. If you don't hold the reset button down for long enough you might end up only rebooting the device instead of resetting it like you wanted initially.
Caution: Do not unplug or turn off the router during this process. Doing so could cause permanent damage to your device.
Please remember a reset like this erases every single setting you have ever changed in the past. We strongly recommend trying other troubleshooting methods before you decide to reset the LevelOne WBR-6001 router.
Login to the Level One WBR 6001
Following that you'll want to log into your LevelOne WBR-6001 router. This is done by using the factory default username and password. Not sure where you can find these? Not to worry. We have them listed for your use in our Login Guide.
Tip: If the defaults aren't working for you it might be because the reset button wasn't held down for long enough.
Change Your Password
After you've successfully reset and logged into your router you'll want to set a new password for it. This can be anything you want it to be, however bear in mind that a strong password contains no personal information and is 14-20 characters in length. For more help be sure to visit our Choosing a Strong Password Guide.
Tip: Keep yourself from losing your new password by writing it on a note and taping it to the bottom of your router.
Setup WiFi on the LevelOne WBR-6001
After you have completed the reset you need to begin the reconfiguration process. We strongly recommend using our LevelOne WBR-6001 WiFi Instructions as a guide to getting your wireless network as secure as possible.
Level One WBR 6001 Help
Be sure to check out our other Level One WBR 6001 info that you might be interested in.
This is the reset router guide for the Level One WBR 6001. We also have the following guides for the same router:
- Level One WBR 6001 - How to change the IP Address on a Level One WBR 6001 router
- Level One WBR 6001 - Level One WBR 6001 User Manual
- Level One WBR 6001 - Level One WBR 6001 Login Instructions
- Level One WBR 6001 - Setup WiFi on the Level One WBR 6001
- Level One WBR 6001 - Information About the Level One WBR 6001 Router
- Level One WBR 6001 - Level One WBR 6001 Screenshots