This page shows how to change the LAN IP Address on the Linksys E900 router.
Other Linksys E900 Guides
This is the ip address guide for the Linksys E900. We also have the following guides for the same router:
- Linksys E900 - Linksys E900 User Manual
- Linksys E900 - Linksys E900 Login Instructions
- Linksys E900 - How to change the DNS settings on a Linksys E900 router
- Linksys E900 - Setup WiFi on the Linksys E900
- Linksys E900 - How to Reset the Linksys E900
- Linksys E900 - Information About the Linksys E900 Router
- Linksys E900 - Linksys E900 Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Linksys E900
To get started configuring the Linksys E900 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Linksys E900, follow our Linksys E900 Login Guide.
Change the LAN IP Address on a Linksys E900
If you followed our login guide above then you should see this screen.
Once logged into the Linksys E900 you should begin on the Setup page. Near the top of the page is the choice Basic Setup, click this.
Configure the LAN section of your Linksys E900
To change your IP Address, the address you see while inside your network, find the boxes labeled IP Address. This is where you enter your new address you have picked out for your Router. We suggest using the address of 192.168.1.1
Make sure you do not change the Subnet Mask, this should always remain at 255.255.255.0 The DHCP Server should also be left enabled to allow your Router to automatically choose these numbers.
When you have finished making changes, click Save Settings.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Linksys E900 Info
Don't forget about our other Linksys E900 info that you might be interested in.
This is the ip address guide for the Linksys E900. We also have the following guides for the same router:
- Linksys E900 - Linksys E900 User Manual
- Linksys E900 - Linksys E900 Login Instructions
- Linksys E900 - How to change the DNS settings on a Linksys E900 router
- Linksys E900 - Setup WiFi on the Linksys E900
- Linksys E900 - How to Reset the Linksys E900
- Linksys E900 - Information About the Linksys E900 Router
- Linksys E900 - Linksys E900 Screenshots