How to change the IP Address on a Linksys EA2700 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Linksys EA2700 router.

Other Linksys EA2700 Guides

This is the ip address guide for the Linksys EA2700.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Linksys EA2700

To get started configuring the Linksys EA2700 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys EA2700, follow our Linksys EA2700 Login Guide.

Change the LAN IP Address on a Linksys EA2700

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Linksys router.

Now that you have finished logging into the Linksys EA2700 you should be on the Setup page. From there, click the choice at the top of the page labeled Basic Setup.

Configure the LAN section of your Linksys EA2700

router setup
This is the setup page from your Linksys router.

Next, you need to scroll down this page until you come to IP Address, this is the address you see while inside your network. Place your cursor in the first of these boxes and enter your new address for your Router here. In these screenshots, the address of 192.168.1.1 is used, this is a very good choice, this would be a good address for your Router. Make sure to leave the DHCP Server enabled, this allows the Router to choose these for you. The Subnet Mask should also be left alone at 255.255.255.0

Don't forget to save your changes before exiting.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Linksys EA2700 Info

Don't forget about our other Linksys EA2700 info that you might be interested in.

This is the ip address guide for the Linksys EA2700.We also have the following guides for the same router: