Setup Router logo in white Setup router name logo in white
Get Software

Setup WiFi on the Linksys WAG300N

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 5 minutes

The Linksys WAG300N router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Other Linksys WAG300N Guides

This is the wifi guide for the Linksys WAG300N. We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Linksys WAG300N

To get started configuring the Linksys WAG300N WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys WAG300N, follow our Linksys WAG300N Login Guide.

Find the WiFi Settings on the Linksys WAG300N

If you followed our login guide above then you should see this screen.

router setup
This is the setup page from your Linksys WAG300N router.

This guide begins on the Basic Setup page of the Linksys WAG300N router. To configure the WiFi settings, click the option of Wireless at the top of the page. This brings you to the correct page.

Change the WiFi Settings on the Linksys WAG300N

wifi wireless
This is the wifi setup page from your Linksys WAG300N router.
  • Network Mode - This is asking what standard of wireless devices are you plan on using with this network. You will need to update your firmware version to allow for a newer wireless standards to be used with this router if needed. Wireless B Only, means your wireless devices are older than 2003. Wireless G Only means your wireless devices were made between 2003 and 2009. Wireless N Only means your wireless device was made between 2009 to 2012. Mixed allows for all of them. If you upgrade this router's firmware you can use newer wireless devices.
  • Network Name (SSID) - This is the name you need to create in order to identify your network. It doesn't matter what you enter here, but we recommend avoiding personal information. Learn more in our guide titled How to Change your Wireless Name.
  • Radio Band - You have the option of Wide - 40MHz Channel and Standard - 20MHz Channel. If you chose the network mode of mixed or Wireless N Only, then pick Wide - 40 MHz Channel. If you choose either Wireless B Only or Wireless G Only then choose the option of Standard - 20MHz Channel.
  • Wide Channel - If you chose Wide - 40MHz Channel, we recommend choosing the channel 6.
  • Standard Channel - If you have chosen channel 6 on the wide channel, then here in the standard channel, choose 1 or 11. WiFi Channels.
  • Wireless SSID Broadcast - This is asking if you want your network name (SSID) to be visible to scanning wireless devices. If you choose to hide it, simply click the Disable radio button. Remember that this does not mean you are completely invisible. A intruder who wants to find hidden networks can with the right tools.
  • Save Settings - Go ahead and click this in order for the changes you made to take effect.

To go to the next page, click the option at the top of the page, in blue, labeled Wireless Security.

router wifi security wireless
This is the wifi security page from your Linksys WAG300N router.
  • Security Mode - This is asking you to choose what type of security method you want to use. We strongly recommend using WPA2-Personal. This is the most secure option available. Learn more in our WEP vs. WPA guide.
  • Encryption - This should be set to AES.
  • Passphrase - This is the password for your network. You will need to type this password into each wireless device in order for them to connect to your local network. We recommend creating a strong password of at least 14-20 characters. Don't forget to add at least one symbol, character, and capital letter to this password for strength. Learn more in our Choosing a Strong Password Guide.
  • Group Key Renewal - This is referring to how often you want the router to create a new encryption key. The default setting here is fine, which should be 3600 seconds.
  • Save Settings - Click this button to save your changes.

That's it, you are finished.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Linksys WAG300N Info

Don't forget about our other Linksys WAG300N info that you might be interested in.

This is the wifi guide for the Linksys WAG300N. We also have the following guides for the same router: