How to change the DNS settings on a Linksys WAG354G router

This page shows how to change the DNS settings on the Linksys WAG354G router.

What is the DNS setting on a Router

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:

173.194.33.73

This mapping happens automatically every time you visit any page on the Internet.

Why Change Your Router's DNS Setting

Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.

By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.

What Should I Change My DNS To

There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.

When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

If you want to use Google Public DNS, use the following settings:

Primary: 8.8.8.8
Secondary: 8.8.4.4

If you want to use OpenDNS, use the following settings:

208.67.222.222
208.67.220.220

Login To The Linksys WAG354G

To get started configuring the Linksys WAG354G DNS page you need to login to your router. If you are already logged in you can skip this step.

To login to the Linksys WAG354G, follow our Linksys WAG354G Login Guide.

Change the DNS settings on a Linksys WAG354G

If you followed our login guide above then you should see this screen.

router status mac address internet IP — This is the *status* page from your Linksys WAG354G router.

You begin on the Status page of the Linksys WAG354G. To change the DNS settings or the Domain Name System settings, click the choice at the top of the page, in black, labeled Setup, then Basic Setup.

Configure the DNS section of your Linksys WAG354G

router setup — This is the *setup* page from your Linksys WAG354G router.

This is the screen to be on in order to change the Domain Name System settings, or DNS settings.

This router has two different spots for setting the DNS server on the same page, we'll set them both. The first is in the section labeled IP Settings. This is most likely the DNS Proxy. In the box labeled Primary DNS, enter the primary address of the DNS server you want to use. Enter the secondary address in the boxes labeled Secondary DNS.

Scroll farther down this page to the Network Address Server Settings (DHCP). In this section you'll see another place to enter the DNS server, this one is the one the router uses. In the boxes labeled Static DNS 1 enter the same primary address that you entered earlier. This DNS server is always accessed first. In the next set of boxes, labeled Static DNS 2, enter the same secondary address that you picked earlier. This address is the one that is used when the first can't be found. If you have a third address, enter that in the next set of boxes called Static DNS 3, although it is perfectly fine to leave these boxes blank.

That's all there is to it. Click Save Settings before you exit.

Possible Problems when Changing your DNS settings

Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.