Linksys WRT54GP2 Login Instructions

This page shows you how to login to the Linksys WRT54GP2 router.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WRT54GP2. We also have the following guides for the same router:

Linksys WRT54GP2 - How to change the IP Address on a Linksys WRT54GP2 router

Linksys WRT54GP2 - Linksys WRT54GP2 User Manual

Linksys WRT54GP2 - How to change the DNS settings on a Linksys WRT54GP2 router

Linksys WRT54GP2 - Setup WiFi on the Linksys WRT54GP2

Linksys WRT54GP2 - How to Reset the Linksys WRT54GP2

Linksys WRT54GP2 - Information About the Linksys WRT54GP2 Router

Linksys WRT54GP2 - Linksys WRT54GP2 Screenshots

Find Your Linksys WRT54GP2 Router IP Address

Before you can log in to your Linksys WRT54GP2 router, you need to figure out it's internal IP address.

Known WRT54GP2 IP Addresses
192.168.1.1

Pick one of these IP addresses and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. It is harmless to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then do one of the following:

Follow our guide called Find Your Router's Internal IP Address.
Download and install our free Router Detector software.

Now that you have your router's internal IP Address, we are ready to login to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WRT54GP2 Router

Your Linksys WRT54GP2 router has a web interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.

Enter Linksys WRT54GP2 Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. The address bar will look like this:

Press the Enter key on your keyboard. A window will show asking for your Linksys WRT54GP2 password.

Linksys WRT54GP2 Default Username and Password

You need to know your username and password to login to your Linksys WRT54GP2. It's possible that the router's password is still set to the factory default. Try all of the Linksys WRT54GP2 factory default usernames and passwords below.

Linksys WRT54GP2 Default Usernames and Passwords
Username	Password
admin	admin
blank	admin

Enter your username and password in the window that pops up. Put your username and password in the appropriate boxes.

Linksys WRT54GP2 login screen

Linksys WRT54GP2 Home Screen

If your password is correct then you will be logged in and see the Linksys WRT54GP2 home screen, which looks like this:

router status mac address internet IP — This is the *status* page from your Linksys WRT54GP2 router.

If you see this screen, then good job, you are now logged in to your Linksys WRT54GP2 router. You are now ready to follow one of our other guides.

Solutions To Linksys WRT54GP2 Login Problems

Here are some ideas to help if you are having problems getting logged in to your router.

Linksys WRT54GP2 Password Doesn't Work

Your router's factory default password might be different than what we have listed here. It doesn't hurt to try all of the other known Linksys passwords. Head over to our list of all Linksys Passwords.

Forgot Password to Linksys WRT54GP2 Router

If your ISP provided your router, then you may have to call them to get your login information. They will most likely have it on file.

How to Reset the Linksys WRT54GP2 Router To Default Settings

If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings. Our How To Reset your Router guide can help you reset your router to factory defaults.