Linksys WRVS4400N Login Instructions

If you need to login to the Linksys WRVS4400N router, then this guide shows you how.

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
Make sure that your VPN provider has lots of exit nodes all around the world.
Check that your VPN will not affect your speed.
Verify that your VPN provider uses WireGuard as the underlying protocol.
Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the login guide for the Linksys WRVS4400N. We also have the following guides for the same router:

Linksys WRVS4400N - Reset the Linksys WRVS4400N

Linksys WRVS4400N - How to change the IP Address on a Linksys WRVS4400N router

Linksys WRVS4400N - Linksys WRVS4400N User Manual

Linksys WRVS4400N - How to change the DNS settings on a Linksys WRVS4400N router

Linksys WRVS4400N - Setup WiFi on the Linksys WRVS4400N

Linksys WRVS4400N - Information About the Linksys WRVS4400N Router

Linksys WRVS4400N - Linksys WRVS4400N Screenshots

Find Your Linksys WRVS4400N Router IP Address

Before you can log in to your Linksys WRVS4400N router, you need to figure out it's internal IP address.

Known WRVS4400N IP Addresses
192.168.123.1
192.168.1.1

Choose an IP address from the list above and then follow the rest of this guide.

If the IP address you picked does not seem to work, then simply try a different one. I will not hurt anything to try different IP addresses.

If you try all of the above IP addresses and still cannot find your router, then you have the following options:

Use our Find Your Router's Internal IP Address guide.
Use our free Router Detector software.

Once you have the internal IP Address of your router, you can log in to it.

Don't forget to sign up for NordVPN's promo deal before it's gone.

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Login to the Linksys WRVS4400N Router

The Linksys WRVS4400N is managed through a web-based interface. You can manage it by using a web browser such as Chrome, Firefox, or Edge.

Enter Linksys WRVS4400N Internal IP Address

Find the address bar in your web browser and type in the internal IP address of your Linksys WRVS4400N router. The address bar will look like this:

Press the Enter key on your keyboard. A window will show asking for your Linksys WRVS4400N password.

Linksys WRVS4400N Default Username and Password

You need to know your username and password to login to your Linksys WRVS4400N. It's possible that the router's password is still set to the factory default. Try all of the Linksys WRVS4400N factory default usernames and passwords below.

Linksys WRVS4400N Default Usernames and Passwords
Username	Password
admin	admin

Put your username and password in the appropriate boxes. Keep trying them all until you get logged in.

Linksys WRVS4400N login screen

Linksys WRVS4400N Home Screen

After you get logged in you should see the Linksys WRVS4400N home screen, which looks like this:

router status mac address internet IP — This is the *status* page from your Linksys WRVS4400N router.

If you see this screen, then you know that you are logged in to your Linksys WRVS4400N router. At this point, you can follow any of our other guides for this router.

Solutions To Linksys WRVS4400N Login Problems

Here are some things that you can try if you are having problems getting logged in to your router.

Linksys WRVS4400N Password Doesn't Work

Perhaps your router's default password is different than what we have listed here. Be sure to try other Linksys passwords. Head over to our list of all Linksys Passwords.

Forgot Password to Linksys WRVS4400N Router

If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.

How to Reset the Linksys WRVS4400N Router To Default Settings

If you still cannot get logged in, then you are probably going to have to reset your router to its default settings. Our How To Reset your Router guide can help you reset your router to factory defaults.