Setup Router logo in white Setup router name logo in white
Get Software

Reset the Linksys WRVS4400N

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Linksys WRVS4400N router. Resetting a router is different than rebooting a router. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's username and password are reset to factory defaults.
  • All WiFi settings are reset, including network name and password.
  • All ISP settings will reset to default, and you may have to contact your ISP.
  • All parental controls, firewall settings, and port forwards will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Linksys WRVS4400N Guides

This is the reset router guide for the Linksys WRVS4400N. We also have the following guides for the same router:

Recover Password in Linksys WRVS4400N

Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the Linksys WRVS4400N

Most routers have a small button on either the back or the bottom. Look at your router and try to find something that looks like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will totally reset your Linksys WRVS4400N router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Linksys WRVS4400N

Now you need to log in using the factory default username and password. You can follow the WRVS4400N Login Guide to find everything that you need to log in.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Linksys WRVS4400N Guides

This isn't our only Linksys WRVS4400N guide. We also have the following guides for this router.

This is the reset router guide for the Linksys WRVS4400N. We also have the following guides for the same router: