This page shows how to change the LAN IP Address on the Mobily WLTFQR-117GN router.
Other Mobily WLTFQR-117GN Guides
This is the ip address guide for the Mobily WLTFQR-117GN. We also have the following guides for the same router:
- Mobily WLTFQR-117GN - Reset the Mobily WLTFQR-117GN
- Mobily WLTFQR-117GN - Setup WiFi on the Mobily WLTFQR-117GN
- Mobily WLTFQR-117GN - Mobily WLTFQR-117GN Login Instructions
- Mobily WLTFQR-117GN - How to change the DNS settings on a Mobily WLTFQR-117GN router
- Mobily WLTFQR-117GN - Mobily WLTFQR-117GN Screenshots
- Mobily WLTFQR-117GN - Information About the Mobily WLTFQR-117GN Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Mobily WLTFQR-117GN
To get started configuring the Mobily WLTFQR-117GN LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Mobily WLTFQR-117GN, follow our Mobily WLTFQR-117GN Login Guide.
Change the LAN IP Address on a Mobily WLTFQR-117GN
If you followed our login guide above then you should see this screen.
After you have logged into the Mobily WLTFQR-117GN you should begin on the Status page. From here, click the Network option at the top of the page.
This opens up new options on the left side of the page. Click the new option of Network Mode.
Configure the LAN section of your Mobily WLTFQR-117GN
You are now on a page like the one you see above. Find the LAN IP Address and enter a new address here for your router. We recommend ending this address in a 1 such as 192.168.0.1
Don't change the LAN Subnet Mask.
Finally click the option of Apply to save your changes.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Mobily WLTFQR-117GN Info
Don't forget about our other Mobily WLTFQR-117GN info that you might be interested in.
This is the ip address guide for the Mobily WLTFQR-117GN. We also have the following guides for the same router:
- Mobily WLTFQR-117GN - Reset the Mobily WLTFQR-117GN
- Mobily WLTFQR-117GN - Setup WiFi on the Mobily WLTFQR-117GN
- Mobily WLTFQR-117GN - Mobily WLTFQR-117GN Login Instructions
- Mobily WLTFQR-117GN - How to change the DNS settings on a Mobily WLTFQR-117GN router
- Mobily WLTFQR-117GN - Mobily WLTFQR-117GN Screenshots
- Mobily WLTFQR-117GN - Information About the Mobily WLTFQR-117GN Router