Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a MyMax WR923-BK router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the MyMax WR923-BK router.

Other MyMax WR923-BK Guides

This is the ip address guide for the MyMax WR923-BK. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The MyMax WR923-BK

To get started configuring the MyMax WR923-BK LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the MyMax WR923-BK, follow our MyMax WR923-BK Login Guide.

Change the LAN IP Address on a MyMax WR923-BK

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your MyMax WR923-BK router.

Once you've logged into the MyMax WR923-BK you should see the Main Menu page. To change your Router IP Address, the address of your Router that you can see from inside the network, click the LAN tab on the left side of the screen. Then, click Static DHCP.

Configure the LAN section of your MyMax WR923-BK

router setup
This is the setup page from your MyMax WR923-BK router.

On this new page, place your cursor in the box marked IP Address and enter the new address you have chosen for your Router. Our suggestion would be to use an address such as 192.168.1.1

Make sure you don't change the Subnet Mask, this should remain at 255.255.255.0, your DHCP Server should also be left enabled.

When you are finished, click the Save button.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other MyMax WR923-BK Info

Don't forget about our other MyMax WR923-BK info that you might be interested in.

This is the ip address guide for the MyMax WR923-BK. We also have the following guides for the same router: